Epson drivers in deb
up vote
0
down vote
favorite
I'm looking for the old Epson scanner drivers. In particular: iscan_2.10.0-2_i386.deb
There is iscan_2.10.0-2_i386.rpm version and sources at official site that can't be build with up-to-date gcc. Alien approach isn't working for the same reason. Old 3rd party site that hosted deb versions is dead. Any ideas?
drivers scanner
asked Nov 19 at 4:35
truf
1234
add a comment |
up vote
0
down vote
favorite
I'm looking for the old Epson scanner drivers. In particular: iscan_2.10.0-2_i386.deb
There is iscan_2.10.0-2_i386.rpm version and sources at official site that can't be build with up-to-date gcc. Alien approach isn't working for the same reason. Old 3rd party site that hosted deb versions is dead. Any ideas?
drivers scanner
asked Nov 19 at 4:35
truf
1234
add a comment |
up vote
0
down vote
favorite
up vote
0
down vote
favorite
I'm looking for the old Epson scanner drivers. In particular: iscan_2.10.0-2_i386.deb
There is iscan_2.10.0-2_i386.rpm version and sources at official site that can't be build with up-to-date gcc. Alien approach isn't working for the same reason. Old 3rd party site that hosted deb versions is dead. Any ideas?
drivers scanner
asked Nov 19 at 4:35
truf
1234
I'm looking for the old Epson scanner drivers. In particular: iscan_2.10.0-2_i386.deb
There is iscan_2.10.0-2_i386.rpm version and sources at official site that can't be build with up-to-date gcc. Alien approach isn't working for the same reason. Old 3rd party site that hosted deb versions is dead. Any ideas?
drivers scanner
drivers scanner
asked Nov 19 at 4:35
truf
1234
asked Nov 19 at 4:35
truf
1234
asked Nov 19 at 4:35
truf
1234
asked Nov 19 at 4:35
truf
1234
asked Nov 19 at 4:35
truf
1234
1234
add a comment |
add a comment |
1 Answer
1
active
oldest
votes
up vote
1
down vote
I would find a old linux distro that is known to have the correct version of gcc or alien, and install either on an old system, virtual box or run from live cd. Then use the older gcc or alien to get the files needed to install. Then get those files onto the computer you want to install them on, and install from there.
answered Nov 19 at 6:42
Michael Prokopec
3628
New contributor
Michael Prokopec is a new contributor to this site. Take care in asking for clarification, commenting, and answering.
Check out our Code of Conduct.
At the end it all was useless. I'v managed to convert rpm to deb in old kubuntu virtual machine, but these debs can't be installed as some required i386 packages are missing. I was able to unpack them from rpm and copy missing i386 libs manually - that didn't help. Then I've managed to build from sources and even debug the driver at runtime but realized that it needs some proprietary piece of lib that Epson distributes without sources. And it's 32bit So I'm stuck. I'll need whole SANE to be 32bit to make it work. And this will require 32bit vers for GUI frontend I'm using. It doesn't worth it.
– truf
Nov 20 at 14:23
To run a 32-bit executable file on a 64-bit multi-architecture Ubuntu system, you have to add the i386 architecture and install the three library packages libc6:i386, libncurses5:i386, and libstdc++6:i386: sudo dpkg --add-architecture i386 and if that does not work sudo apt-get install multiarch-support after you have done the first ones. Like Kosh!
– Michael Prokopec
Nov 20 at 18:11
add a comment |
1 Answer
1
active
oldest
votes
1 Answer
1
active
oldest
votes
active
oldest
votes
active
oldest
votes
up vote
1
down vote
I would find a old linux distro that is known to have the correct version of gcc or alien, and install either on an old system, virtual box or run from live cd. Then use the older gcc or alien to get the files needed to install. Then get those files onto the computer you want to install them on, and install from there.
answered Nov 19 at 6:42
Michael Prokopec
3628
New contributor
Michael Prokopec is a new contributor to this site. Take care in asking for clarification, commenting, and answering.
Check out our Code of Conduct.
At the end it all was useless. I'v managed to convert rpm to deb in old kubuntu virtual machine, but these debs can't be installed as some required i386 packages are missing. I was able to unpack them from rpm and copy missing i386 libs manually - that didn't help. Then I've managed to build from sources and even debug the driver at runtime but realized that it needs some proprietary piece of lib that Epson distributes without sources. And it's 32bit So I'm stuck. I'll need whole SANE to be 32bit to make it work. And this will require 32bit vers for GUI frontend I'm using. It doesn't worth it.
– truf
Nov 20 at 14:23
To run a 32-bit executable file on a 64-bit multi-architecture Ubuntu system, you have to add the i386 architecture and install the three library packages libc6:i386, libncurses5:i386, and libstdc++6:i386: sudo dpkg --add-architecture i386 and if that does not work sudo apt-get install multiarch-support after you have done the first ones. Like Kosh!
– Michael Prokopec
Nov 20 at 18:11
add a comment |
up vote
1
down vote
I would find a old linux distro that is known to have the correct version of gcc or alien, and install either on an old system, virtual box or run from live cd. Then use the older gcc or alien to get the files needed to install. Then get those files onto the computer you want to install them on, and install from there.
answered Nov 19 at 6:42
Michael Prokopec
3628
New contributor
Michael Prokopec is a new contributor to this site. Take care in asking for clarification, commenting, and answering.
Check out our Code of Conduct.
At the end it all was useless. I'v managed to convert rpm to deb in old kubuntu virtual machine, but these debs can't be installed as some required i386 packages are missing. I was able to unpack them from rpm and copy missing i386 libs manually - that didn't help. Then I've managed to build from sources and even debug the driver at runtime but realized that it needs some proprietary piece of lib that Epson distributes without sources. And it's 32bit So I'm stuck. I'll need whole SANE to be 32bit to make it work. And this will require 32bit vers for GUI frontend I'm using. It doesn't worth it.
– truf
Nov 20 at 14:23
To run a 32-bit executable file on a 64-bit multi-architecture Ubuntu system, you have to add the i386 architecture and install the three library packages libc6:i386, libncurses5:i386, and libstdc++6:i386: sudo dpkg --add-architecture i386 and if that does not work sudo apt-get install multiarch-support after you have done the first ones. Like Kosh!
– Michael Prokopec
Nov 20 at 18:11
add a comment |
up vote
1
down vote
up vote
1
down vote
I would find a old linux distro that is known to have the correct version of gcc or alien, and install either on an old system, virtual box or run from live cd. Then use the older gcc or alien to get the files needed to install. Then get those files onto the computer you want to install them on, and install from there.
answered Nov 19 at 6:42
Michael Prokopec
3628
New contributor
Michael Prokopec is a new contributor to this site. Take care in asking for clarification, commenting, and answering.
Check out our Code of Conduct.
I would find a old linux distro that is known to have the correct version of gcc or alien, and install either on an old system, virtual box or run from live cd. Then use the older gcc or alien to get the files needed to install. Then get those files onto the computer you want to install them on, and install from there.
answered Nov 19 at 6:42
Michael Prokopec
3628
New contributor
Michael Prokopec is a new contributor to this site. Take care in asking for clarification, commenting, and answering.
Check out our Code of Conduct.
answered Nov 19 at 6:42
Michael Prokopec
3628
New contributor
Michael Prokopec is a new contributor to this site. Take care in asking for clarification, commenting, and answering.
Check out our Code of Conduct.
answered Nov 19 at 6:42
Michael Prokopec
3628
answered Nov 19 at 6:42
Michael Prokopec
3628
3628
New contributor
Michael Prokopec is a new contributor to this site. Take care in asking for clarification, commenting, and answering.
Check out our Code of Conduct.
New contributor
Michael Prokopec is a new contributor to this site. Take care in asking for clarification, commenting, and answering.
Check out our Code of Conduct.
Michael Prokopec is a new contributor to this site. Take care in asking for clarification, commenting, and answering.
Check out our Code of Conduct.
At the end it all was useless. I'v managed to convert rpm to deb in old kubuntu virtual machine, but these debs can't be installed as some required i386 packages are missing. I was able to unpack them from rpm and copy missing i386 libs manually - that didn't help. Then I've managed to build from sources and even debug the driver at runtime but realized that it needs some proprietary piece of lib that Epson distributes without sources. And it's 32bit So I'm stuck. I'll need whole SANE to be 32bit to make it work. And this will require 32bit vers for GUI frontend I'm using. It doesn't worth it.
– truf
Nov 20 at 14:23
To run a 32-bit executable file on a 64-bit multi-architecture Ubuntu system, you have to add the i386 architecture and install the three library packages libc6:i386, libncurses5:i386, and libstdc++6:i386: sudo dpkg --add-architecture i386 and if that does not work sudo apt-get install multiarch-support after you have done the first ones. Like Kosh!
– Michael Prokopec
Nov 20 at 18:11
add a comment |
At the end it all was useless. I'v managed to convert rpm to deb in old kubuntu virtual machine, but these debs can't be installed as some required i386 packages are missing. I was able to unpack them from rpm and copy missing i386 libs manually - that didn't help. Then I've managed to build from sources and even debug the driver at runtime but realized that it needs some proprietary piece of lib that Epson distributes without sources. And it's 32bit So I'm stuck. I'll need whole SANE to be 32bit to make it work. And this will require 32bit vers for GUI frontend I'm using. It doesn't worth it.
– truf
Nov 20 at 14:23
To run a 32-bit executable file on a 64-bit multi-architecture Ubuntu system, you have to add the i386 architecture and install the three library packages libc6:i386, libncurses5:i386, and libstdc++6:i386: sudo dpkg --add-architecture i386 and if that does not work sudo apt-get install multiarch-support after you have done the first ones. Like Kosh!
– Michael Prokopec
Nov 20 at 18:11
At the end it all was useless. I'v managed to convert rpm to deb in old kubuntu virtual machine, but these debs can't be installed as some required i386 packages are missing. I was able to unpack them from rpm and copy missing i386 libs manually - that didn't help. Then I've managed to build from sources and even debug the driver at runtime but realized that it needs some proprietary piece of lib that Epson distributes without sources. And it's 32bit So I'm stuck. I'll need whole SANE to be 32bit to make it work. And this will require 32bit vers for GUI frontend I'm using. It doesn't worth it.
– truf
Nov 20 at 14:23
At the end it all was useless. I'v managed to convert rpm to deb in old kubuntu virtual machine, but these debs can't be installed as some required i386 packages are missing. I was able to unpack them from rpm and copy missing i386 libs manually - that didn't help. Then I've managed to build from sources and even debug the driver at runtime but realized that it needs some proprietary piece of lib that Epson distributes without sources. And it's 32bit So I'm stuck. I'll need whole SANE to be 32bit to make it work. And this will require 32bit vers for GUI frontend I'm using. It doesn't worth it.
– truf
Nov 20 at 14:23
To run a 32-bit executable file on a 64-bit multi-architecture Ubuntu system, you have to add the i386 architecture and install the three library packages libc6:i386, libncurses5:i386, and libstdc++6:i386: sudo dpkg --add-architecture i386 and if that does not work sudo apt-get install multiarch-support after you have done the first ones. Like Kosh!
– Michael Prokopec
Nov 20 at 18:11
To run a 32-bit executable file on a 64-bit multi-architecture Ubuntu system, you have to add the i386 architecture and install the three library packages libc6:i386, libncurses5:i386, and libstdc++6:i386: sudo dpkg --add-architecture i386 and if that does not work sudo apt-get install multiarch-support after you have done the first ones. Like Kosh!
– Michael Prokopec
Nov 20 at 18:11
add a comment |
Sign up or log in
StackExchange.ready(function () {
StackExchange.helpers.onClickDraftSave('#login-link');
});
Sign up using Google
Sign up using Facebook
Sign up using Email and Password
Post as a guest
Required, but never shown
StackExchange.ready(
function () {
StackExchange.openid.initPostLogin('.new-post-login', 'https%3a%2f%2funix.stackexchange.com%2fquestions%2f482665%2fepson-drivers-in-deb%23new-answer', 'question_page');
}
);
Post as a guest
Required, but never shown
Sign up or log in
StackExchange.ready(function () {
StackExchange.helpers.onClickDraftSave('#login-link');
});
Sign up using Google
Sign up using Facebook
Sign up using Email and Password
Post as a guest
Required, but never shown
Sign up or log in
StackExchange.ready(function () {
StackExchange.helpers.onClickDraftSave('#login-link');
});
Sign up using Google
Sign up using Facebook
Sign up using Email and Password
Post as a guest
Required, but never shown
Sign up or log in
StackExchange.ready(function () {
StackExchange.helpers.onClickDraftSave('#login-link');
});
Sign up using Google
Sign up using Facebook
Sign up using Email and Password
Sign up using Google
Sign up using Facebook
Sign up using Email and Password
Post as a guest
Required, but never shown
Required, but never shown
Required, but never shown
Required, but never shown
Required, but never shown
Required, but never shown
Required, but never shown
Required, but never shown
Required, but never shown
