Package manager for Busybox
up vote
3
down vote
favorite
Is there a package manager for busybox devices?
After all Busybox utilities are quite restricted. I suppose one would have to compile it for specific device.
Since I am asking on Unix/Linux exchange and Busybox was made for Linux, I assumed that it was clear that os in question is Linux.
package-management busybox
asked Jan 13 at 0:46
user1561358
12816
add a comment |
up vote
3
down vote
favorite
Is there a package manager for busybox devices?
After all Busybox utilities are quite restricted. I suppose one would have to compile it for specific device.
Since I am asking on Unix/Linux exchange and Busybox was made for Linux, I assumed that it was clear that os in question is Linux.
package-management busybox
asked Jan 13 at 0:46
user1561358
12816
3
Busybox is a shell, not a distribution. This is a peculiar question. Mixing hardware architecture into it ("...specific device") makes it more peculiar. What device are you asking about really? What OS does it run? Are you asking about package installation on embedded devices?
– Wildcard
Jan 13 at 1:04
Apparently this is a common question for Busybox: busybox.net/FAQ.html#build_system Maybe we should address it here for their sake?
– jdwolf
Jan 13 at 1:32
2
@Wildcard I thought it was quite clear. Yes Busybox is not a distro (it isn't a shell either really). Since I am asking on Unix/Linux exchange and Busybox was made for Linux, I assumed that it was clear that os in question is Linux.
– user1561358
Jan 13 at 19:41
I don't understand what a "package manager for busybox" would look like. Something that modifies the binary to add more tools to it?
– Michael Mrozek♦
Jan 18 at 17:03
1
I will try to make it more clear. Suppose that you have a device running linux kernel and using Busybox binary for all tools and such. Now suppose that you want to install some software on the device. Busybox doesn't have a package manager integrated, unless you count rpm as one. So you have to install that first. How would you do it?
– user1561358
Jan 19 at 14:12
add a comment |
up vote
3
down vote
favorite
up vote
3
down vote
favorite
Is there a package manager for busybox devices?
After all Busybox utilities are quite restricted. I suppose one would have to compile it for specific device.
Since I am asking on Unix/Linux exchange and Busybox was made for Linux, I assumed that it was clear that os in question is Linux.
package-management busybox
asked Jan 13 at 0:46
user1561358
12816
Is there a package manager for busybox devices?
After all Busybox utilities are quite restricted. I suppose one would have to compile it for specific device.
Since I am asking on Unix/Linux exchange and Busybox was made for Linux, I assumed that it was clear that os in question is Linux.
package-management busybox
package-management busybox
asked Jan 13 at 0:46
user1561358
12816
asked Jan 13 at 0:46
user1561358
12816
edited Jan 13 at 20:11
asked Jan 13 at 0:46
user1561358
12816
asked Jan 13 at 0:46
user1561358
12816
asked Jan 13 at 0:46
user1561358
12816
12816
3
Busybox is a shell, not a distribution. This is a peculiar question. Mixing hardware architecture into it ("...specific device") makes it more peculiar. What device are you asking about really? What OS does it run? Are you asking about package installation on embedded devices?
– Wildcard
Jan 13 at 1:04
Apparently this is a common question for Busybox: busybox.net/FAQ.html#build_system Maybe we should address it here for their sake?
– jdwolf
Jan 13 at 1:32
2
@Wildcard I thought it was quite clear. Yes Busybox is not a distro (it isn't a shell either really). Since I am asking on Unix/Linux exchange and Busybox was made for Linux, I assumed that it was clear that os in question is Linux.
– user1561358
Jan 13 at 19:41
I don't understand what a "package manager for busybox" would look like. Something that modifies the binary to add more tools to it?
– Michael Mrozek♦
Jan 18 at 17:03
1
I will try to make it more clear. Suppose that you have a device running linux kernel and using Busybox binary for all tools and such. Now suppose that you want to install some software on the device. Busybox doesn't have a package manager integrated, unless you count rpm as one. So you have to install that first. How would you do it?
– user1561358
Jan 19 at 14:12
add a comment |
3
Busybox is a shell, not a distribution. This is a peculiar question. Mixing hardware architecture into it ("...specific device") makes it more peculiar. What device are you asking about really? What OS does it run? Are you asking about package installation on embedded devices?
– Wildcard
Jan 13 at 1:04
Apparently this is a common question for Busybox: busybox.net/FAQ.html#build_system Maybe we should address it here for their sake?
– jdwolf
Jan 13 at 1:32
2
@Wildcard I thought it was quite clear. Yes Busybox is not a distro (it isn't a shell either really). Since I am asking on Unix/Linux exchange and Busybox was made for Linux, I assumed that it was clear that os in question is Linux.
– user1561358
Jan 13 at 19:41
I don't understand what a "package manager for busybox" would look like. Something that modifies the binary to add more tools to it?
– Michael Mrozek♦
Jan 18 at 17:03
1
I will try to make it more clear. Suppose that you have a device running linux kernel and using Busybox binary for all tools and such. Now suppose that you want to install some software on the device. Busybox doesn't have a package manager integrated, unless you count rpm as one. So you have to install that first. How would you do it?
– user1561358
Jan 19 at 14:12
3
3
Busybox is a shell, not a distribution. This is a peculiar question. Mixing hardware architecture into it ("...specific device") makes it more peculiar. What device are you asking about really? What OS does it run? Are you asking about package installation on embedded devices?
– Wildcard
Jan 13 at 1:04
Busybox is a shell, not a distribution. This is a peculiar question. Mixing hardware architecture into it ("...specific device") makes it more peculiar. What device are you asking about really? What OS does it run? Are you asking about package installation on embedded devices?
– Wildcard
Jan 13 at 1:04
Apparently this is a common question for Busybox: busybox.net/FAQ.html#build_system Maybe we should address it here for their sake?
– jdwolf
Jan 13 at 1:32
Apparently this is a common question for Busybox: busybox.net/FAQ.html#build_system Maybe we should address it here for their sake?
– jdwolf
Jan 13 at 1:32
2
2
@Wildcard I thought it was quite clear. Yes Busybox is not a distro (it isn't a shell either really). Since I am asking on Unix/Linux exchange and Busybox was made for Linux, I assumed that it was clear that os in question is Linux.
– user1561358
Jan 13 at 19:41
@Wildcard I thought it was quite clear. Yes Busybox is not a distro (it isn't a shell either really). Since I am asking on Unix/Linux exchange and Busybox was made for Linux, I assumed that it was clear that os in question is Linux.
– user1561358
Jan 13 at 19:41
I don't understand what a "package manager for busybox" would look like. Something that modifies the binary to add more tools to it?
– Michael Mrozek♦
Jan 18 at 17:03
I don't understand what a "package manager for busybox" would look like. Something that modifies the binary to add more tools to it?
– Michael Mrozek♦
Jan 18 at 17:03
1
1
I will try to make it more clear. Suppose that you have a device running linux kernel and using Busybox binary for all tools and such. Now suppose that you want to install some software on the device. Busybox doesn't have a package manager integrated, unless you count rpm as one. So you have to install that first. How would you do it?
– user1561358
Jan 19 at 14:12
I will try to make it more clear. Suppose that you have a device running linux kernel and using Busybox binary for all tools and such. Now suppose that you want to install some software on the device. Busybox doesn't have a package manager integrated, unless you count rpm as one. So you have to install that first. How would you do it?
– user1561358
Jan 19 at 14:12
add a comment |
2 Answers
2
active
oldest
votes
up vote
2
down vote
BusyBox is what is called a multicall binary. Meaning it is one binary that has multiple utility functions. If called as a shell it runs as a shell, if called as the ls command it runs the ls command.
It acts as a replacement to many standard tools used on Linux and Unix-like systems with a small memory footprint. It replaces the functionality of other software like GNU coreutils, util-linux, iproute, etc and its intent is usually to be targeted to the requirements of a specific embedded system.
Therefor if the desire is to have a package manager of utilities in fact.. this is what busybox replaces and is designed not to be. So you can simply use the suite of tools busybox replaces.
You can select which utilities are included in busybox when you build it during compiling. Its not intended to be configured after the fact.
https://www.busybox.net/FAQ.html#build_system
answered Jan 13 at 1:50
jdwolf
2,570216
Ok suppose I have only busybox on my device, and I need something that it doesn't have. How would I install that something? Now suppose I need package manager. How would I install it?
– user1561358
Jan 19 at 14:19
@user1561358 Now there is a good question to ask here. I'll say generally many embedded systems do not use package managers they use software to build images and then write the images to the embedded system. The installation is then fixed. Some software like OpenWRT has a package manager built in. Some other software like the Linux subsystem of Android has ways of adding a package manager. It depends on your embedded device.
– jdwolf
Jan 19 at 14:32
In my case it's steam link. I had some success with installing libraries on it with rpm (that is included). But anything more complicated like dpkg, runs into symbol dependency issues. And unlike library dependencies, these are harder to solve.
– user1561358
Jan 19 at 15:44
add a comment |
up vote
0
down vote
Entware is the "Ultimate repo for embedded devices". You can install it on routers, but I guess it would also work on other kind of busy-box devices. Check the wiki for how to install it.
answered Nov 19 at 6:23
NatoBoram
11
New contributor
NatoBoram is a new contributor to this site. Take care in asking for clarification, commenting, and answering.
Check out our Code of Conduct.
add a comment |
2 Answers
2
active
oldest
votes
2 Answers
2
active
oldest
votes
active
oldest
votes
active
oldest
votes
up vote
2
down vote
BusyBox is what is called a multicall binary. Meaning it is one binary that has multiple utility functions. If called as a shell it runs as a shell, if called as the ls command it runs the ls command.
It acts as a replacement to many standard tools used on Linux and Unix-like systems with a small memory footprint. It replaces the functionality of other software like GNU coreutils, util-linux, iproute, etc and its intent is usually to be targeted to the requirements of a specific embedded system.
Therefor if the desire is to have a package manager of utilities in fact.. this is what busybox replaces and is designed not to be. So you can simply use the suite of tools busybox replaces.
You can select which utilities are included in busybox when you build it during compiling. Its not intended to be configured after the fact.
https://www.busybox.net/FAQ.html#build_system
answered Jan 13 at 1:50
jdwolf
2,570216
Ok suppose I have only busybox on my device, and I need something that it doesn't have. How would I install that something? Now suppose I need package manager. How would I install it?
– user1561358
Jan 19 at 14:19
@user1561358 Now there is a good question to ask here. I'll say generally many embedded systems do not use package managers they use software to build images and then write the images to the embedded system. The installation is then fixed. Some software like OpenWRT has a package manager built in. Some other software like the Linux subsystem of Android has ways of adding a package manager. It depends on your embedded device.
– jdwolf
Jan 19 at 14:32
In my case it's steam link. I had some success with installing libraries on it with rpm (that is included). But anything more complicated like dpkg, runs into symbol dependency issues. And unlike library dependencies, these are harder to solve.
– user1561358
Jan 19 at 15:44
add a comment |
up vote
2
down vote
BusyBox is what is called a multicall binary. Meaning it is one binary that has multiple utility functions. If called as a shell it runs as a shell, if called as the ls command it runs the ls command.
It acts as a replacement to many standard tools used on Linux and Unix-like systems with a small memory footprint. It replaces the functionality of other software like GNU coreutils, util-linux, iproute, etc and its intent is usually to be targeted to the requirements of a specific embedded system.
Therefor if the desire is to have a package manager of utilities in fact.. this is what busybox replaces and is designed not to be. So you can simply use the suite of tools busybox replaces.
You can select which utilities are included in busybox when you build it during compiling. Its not intended to be configured after the fact.
https://www.busybox.net/FAQ.html#build_system
answered Jan 13 at 1:50
jdwolf
2,570216
Ok suppose I have only busybox on my device, and I need something that it doesn't have. How would I install that something? Now suppose I need package manager. How would I install it?
– user1561358
Jan 19 at 14:19
@user1561358 Now there is a good question to ask here. I'll say generally many embedded systems do not use package managers they use software to build images and then write the images to the embedded system. The installation is then fixed. Some software like OpenWRT has a package manager built in. Some other software like the Linux subsystem of Android has ways of adding a package manager. It depends on your embedded device.
– jdwolf
Jan 19 at 14:32
In my case it's steam link. I had some success with installing libraries on it with rpm (that is included). But anything more complicated like dpkg, runs into symbol dependency issues. And unlike library dependencies, these are harder to solve.
– user1561358
Jan 19 at 15:44
add a comment |
up vote
2
down vote
up vote
2
down vote
BusyBox is what is called a multicall binary. Meaning it is one binary that has multiple utility functions. If called as a shell it runs as a shell, if called as the ls command it runs the ls command.
It acts as a replacement to many standard tools used on Linux and Unix-like systems with a small memory footprint. It replaces the functionality of other software like GNU coreutils, util-linux, iproute, etc and its intent is usually to be targeted to the requirements of a specific embedded system.
Therefor if the desire is to have a package manager of utilities in fact.. this is what busybox replaces and is designed not to be. So you can simply use the suite of tools busybox replaces.
You can select which utilities are included in busybox when you build it during compiling. Its not intended to be configured after the fact.
https://www.busybox.net/FAQ.html#build_system
answered Jan 13 at 1:50
jdwolf
2,570216
BusyBox is what is called a multicall binary. Meaning it is one binary that has multiple utility functions. If called as a shell it runs as a shell, if called as the ls command it runs the ls command.
It acts as a replacement to many standard tools used on Linux and Unix-like systems with a small memory footprint. It replaces the functionality of other software like GNU coreutils, util-linux, iproute, etc and its intent is usually to be targeted to the requirements of a specific embedded system.
Therefor if the desire is to have a package manager of utilities in fact.. this is what busybox replaces and is designed not to be. So you can simply use the suite of tools busybox replaces.
You can select which utilities are included in busybox when you build it during compiling. Its not intended to be configured after the fact.
https://www.busybox.net/FAQ.html#build_system
answered Jan 13 at 1:50
jdwolf
2,570216
edited Jan 13 at 1:55
answered Jan 13 at 1:50
jdwolf
2,570216
answered Jan 13 at 1:50
jdwolf
2,570216
answered Jan 13 at 1:50
jdwolf
2,570216
2,570216
Ok suppose I have only busybox on my device, and I need something that it doesn't have. How would I install that something? Now suppose I need package manager. How would I install it?
– user1561358
Jan 19 at 14:19
@user1561358 Now there is a good question to ask here. I'll say generally many embedded systems do not use package managers they use software to build images and then write the images to the embedded system. The installation is then fixed. Some software like OpenWRT has a package manager built in. Some other software like the Linux subsystem of Android has ways of adding a package manager. It depends on your embedded device.
– jdwolf
Jan 19 at 14:32
In my case it's steam link. I had some success with installing libraries on it with rpm (that is included). But anything more complicated like dpkg, runs into symbol dependency issues. And unlike library dependencies, these are harder to solve.
– user1561358
Jan 19 at 15:44
add a comment |
Ok suppose I have only busybox on my device, and I need something that it doesn't have. How would I install that something? Now suppose I need package manager. How would I install it?
– user1561358
Jan 19 at 14:19
@user1561358 Now there is a good question to ask here. I'll say generally many embedded systems do not use package managers they use software to build images and then write the images to the embedded system. The installation is then fixed. Some software like OpenWRT has a package manager built in. Some other software like the Linux subsystem of Android has ways of adding a package manager. It depends on your embedded device.
– jdwolf
Jan 19 at 14:32
In my case it's steam link. I had some success with installing libraries on it with rpm (that is included). But anything more complicated like dpkg, runs into symbol dependency issues. And unlike library dependencies, these are harder to solve.
– user1561358
Jan 19 at 15:44
Ok suppose I have only busybox on my device, and I need something that it doesn't have. How would I install that something? Now suppose I need package manager. How would I install it?
– user1561358
Jan 19 at 14:19
Ok suppose I have only busybox on my device, and I need something that it doesn't have. How would I install that something? Now suppose I need package manager. How would I install it?
– user1561358
Jan 19 at 14:19
@user1561358 Now there is a good question to ask here. I'll say generally many embedded systems do not use package managers they use software to build images and then write the images to the embedded system. The installation is then fixed. Some software like OpenWRT has a package manager built in. Some other software like the Linux subsystem of Android has ways of adding a package manager. It depends on your embedded device.
– jdwolf
Jan 19 at 14:32
@user1561358 Now there is a good question to ask here. I'll say generally many embedded systems do not use package managers they use software to build images and then write the images to the embedded system. The installation is then fixed. Some software like OpenWRT has a package manager built in. Some other software like the Linux subsystem of Android has ways of adding a package manager. It depends on your embedded device.
– jdwolf
Jan 19 at 14:32
In my case it's steam link. I had some success with installing libraries on it with rpm (that is included). But anything more complicated like dpkg, runs into symbol dependency issues. And unlike library dependencies, these are harder to solve.
– user1561358
Jan 19 at 15:44
In my case it's steam link. I had some success with installing libraries on it with rpm (that is included). But anything more complicated like dpkg, runs into symbol dependency issues. And unlike library dependencies, these are harder to solve.
– user1561358
Jan 19 at 15:44
add a comment |
up vote
0
down vote
Entware is the "Ultimate repo for embedded devices". You can install it on routers, but I guess it would also work on other kind of busy-box devices. Check the wiki for how to install it.
answered Nov 19 at 6:23
NatoBoram
11
New contributor
NatoBoram is a new contributor to this site. Take care in asking for clarification, commenting, and answering.
Check out our Code of Conduct.
add a comment |
up vote
0
down vote
Entware is the "Ultimate repo for embedded devices". You can install it on routers, but I guess it would also work on other kind of busy-box devices. Check the wiki for how to install it.
answered Nov 19 at 6:23
NatoBoram
11
New contributor
NatoBoram is a new contributor to this site. Take care in asking for clarification, commenting, and answering.
Check out our Code of Conduct.
add a comment |
up vote
0
down vote
up vote
0
down vote
Entware is the "Ultimate repo for embedded devices". You can install it on routers, but I guess it would also work on other kind of busy-box devices. Check the wiki for how to install it.
answered Nov 19 at 6:23
NatoBoram
11
New contributor
NatoBoram is a new contributor to this site. Take care in asking for clarification, commenting, and answering.
Check out our Code of Conduct.
Entware is the "Ultimate repo for embedded devices". You can install it on routers, but I guess it would also work on other kind of busy-box devices. Check the wiki for how to install it.
answered Nov 19 at 6:23
NatoBoram
11
New contributor
NatoBoram is a new contributor to this site. Take care in asking for clarification, commenting, and answering.
Check out our Code of Conduct.
answered Nov 19 at 6:23
NatoBoram
11
New contributor
NatoBoram is a new contributor to this site. Take care in asking for clarification, commenting, and answering.
Check out our Code of Conduct.
answered Nov 19 at 6:23
NatoBoram
11
answered Nov 19 at 6:23
NatoBoram
11
11
New contributor
NatoBoram is a new contributor to this site. Take care in asking for clarification, commenting, and answering.
Check out our Code of Conduct.
New contributor
NatoBoram is a new contributor to this site. Take care in asking for clarification, commenting, and answering.
Check out our Code of Conduct.
NatoBoram is a new contributor to this site. Take care in asking for clarification, commenting, and answering.
Check out our Code of Conduct.
add a comment |
add a comment |
Sign up or log in
StackExchange.ready(function () {
StackExchange.helpers.onClickDraftSave('#login-link');
});
Sign up using Google
Sign up using Facebook
Sign up using Email and Password
Post as a guest
Required, but never shown
StackExchange.ready(
function () {
StackExchange.openid.initPostLogin('.new-post-login', 'https%3a%2f%2funix.stackexchange.com%2fquestions%2f416715%2fpackage-manager-for-busybox%23new-answer', 'question_page');
}
);
Post as a guest
Required, but never shown
Sign up or log in
StackExchange.ready(function () {
StackExchange.helpers.onClickDraftSave('#login-link');
});
Sign up using Google
Sign up using Facebook
Sign up using Email and Password
Post as a guest
Required, but never shown
Sign up or log in
StackExchange.ready(function () {
StackExchange.helpers.onClickDraftSave('#login-link');
});
Sign up using Google
Sign up using Facebook
Sign up using Email and Password
Post as a guest
Required, but never shown
Sign up or log in
StackExchange.ready(function () {
StackExchange.helpers.onClickDraftSave('#login-link');
});
Sign up using Google
Sign up using Facebook
Sign up using Email and Password
Sign up using Google
Sign up using Facebook
Sign up using Email and Password
Post as a guest
Required, but never shown
Required, but never shown
Required, but never shown
Required, but never shown
Required, but never shown
Required, but never shown
Required, but never shown
Required, but never shown
Required, but never shown
3
Busybox is a shell, not a distribution. This is a peculiar question. Mixing hardware architecture into it ("...specific device") makes it more peculiar. What device are you asking about really? What OS does it run? Are you asking about package installation on embedded devices?
– Wildcard
Jan 13 at 1:04
Apparently this is a common question for Busybox: busybox.net/FAQ.html#build_system Maybe we should address it here for their sake?
– jdwolf
Jan 13 at 1:32
2
@Wildcard I thought it was quite clear. Yes Busybox is not a distro (it isn't a shell either really). Since I am asking on Unix/Linux exchange and Busybox was made for Linux, I assumed that it was clear that os in question is Linux.
– user1561358
Jan 13 at 19:41
I don't understand what a "package manager for busybox" would look like. Something that modifies the binary to add more tools to it?
– Michael Mrozek♦
Jan 18 at 17:03
1
I will try to make it more clear. Suppose that you have a device running linux kernel and using Busybox binary for all tools and such. Now suppose that you want to install some software on the device. Busybox doesn't have a package manager integrated, unless you count rpm as one. So you have to install that first. How would you do it?
– user1561358
Jan 19 at 14:12